Type : Hydraulic Breakers

Fits : All size machines except Super-Reach

Application : For breaking out concrete / rock / tarmac

Notes :Hydraulic Pipework Required

Type : Auger and Flights

Fits : 3 / 5 / 7 / 14 and 21 Ton Machines

Application : For boring holes in soft to medium ground, 1.5m deep. 1.5m extensions available

Notes : Two Way Circuit Required

Type : Hydraulic or Mechanical Concrete Pulverisers

Fits : 14 / 20 Ton Machines

Application : For demolition of buildings, walls, etc and crushing large concrete lumps

Notes : Grapple plate required for mechanical pulverizer

Type : Masterclaw

Fits : 7 / 14 / 20 Ton Machines

Application : For re-handling larger objects, logs, tyres, demolition material, rocks etc.

Type : Five Finger Mechanical Grab

Fits : 14 / 21/ 35 and 45 Ton Machines

Application : For re-handling larger objects, logs, rocks etc.

Notes : Grapple plate required to be welded to the machine

Type : Ripper Tooth

Fits : 7 / 14 / 21 / 35 and 45 Ton Machines

Application : For extracting stumps, breaking hard group, etc.

Type : Power Rake 3 / 5 / 7 Tyne

Fits : 7 / 14 / 21 and 35 Ton Machines

Application : For clearing wooded areas/roots and sorting materials.

Type : Digging Grab

Fits : 14 / 21 and 35 Ton Machines

Application : For digging shafts or limited swing excavations

Notes : Two way circuit required

Type : Re-handling Grab

Fits : 7 / 14 / 21 Ton Machines

Application : For re-handling loose material such as sand, shingle, etc.

Notes : Two way circuit required

Type : Dipper Extension

Fits : 7 / 14 / 20 Ton Machines

Application : For increasing dipper length. Bucket has a fixed geometry.

Notes :Smaller bucket size used

Type : Reversible Forks / Excavator Pallet Forks

Fits : 14 / 20 Ton Machines

Application : For re-handling pallets etc with excavator arm

Type : Compactor Plate

Fits : 1 / 3 / 5 / 7 / 14 / 21 and 35 Ton Machines

Application : Compacting small areas and trenches

Notes : Hydraulic Pipework required

Type : Tilting Bucket / Blade

Fits : 3 / 5 / 7 /14 and 21 Ton Machines

Application : For grading at different angles

Notes : Hydraulic Pipework required

Type : Trapezoidal Bucket

Fits : 7 / 14 / 20 Ton Machines

Application : For cutting angled or "V" trenches/ditches

Type : Reed Bucket

Fits : 7 / 14 / 21 Ton Machines

Application : For cutting and re-handling reeds

Notes : Hydraulic Pipework required

Type : Shaker Bucket

Fits : 3 / 7 / 14 / 21 and 35 Ton Machines

Application : For sorting larger objects from small

Type : Cold Patch Planer

Fits : 5 / 7 Ton and Backhoe Loader Machines

Application : For planing small patches of tarmac up to 50mm thick

Notes : Hydraulic Pipework required

Type : Man Cage

Fits : Telehandlers & Forklifts

Application : To be used as a working platform for one or two people. 4m working platform : up to 6 people

Notes : Tilt Restrictor required for Telehandlers only.

Type : Block Grab

Fits : Telehandlers & 7 / 14 / 21 Ton Machines

Application : For lifting piles of bricks, blocks, slabs etc.

Type : Self Tipping Skips

Fits : Telehandlers & Forklifts

Application : For moving sand, mortar, rubbish etc.

Type : Re-handling Buckets / Grain Buckets

Fits : Telehandlers

Application : For moving quanities of light material, paper, grain etc.

Type : Dung Forks with Hydraulic Clamp

Fits : Telehandlers and Skidsteers

Application : For handling waste paper, dung, straw, muck etc.

Type : Pole Grab

Fits : 13/22 tonne excavators, and long reaches sr15/22

Application : For extracting and positioning poles and posts into a number of ground surfaces.

Type : EMV (Excavator Mounted Vibrator)

Fits : 14 / 21 and 34 ton machines

Application : For inserting and removing sheet piles.

Type : Rotating Multi Processor

Fits : 7 to 45 ton machines

Application : Demolition of concrete structures cutting steel beams depending on jaws fitted. Choice of three sets of jaws:- concrete crushing, steel rebar, steel jaws.

Type : Rotating Selector Grab

Fits : 7/13 and 22 tonnes machines

Application : For rehandling, sorting and demolition work.

Type : Magnet

Fits : 14 / 21 and 35 ton machines

Application : Excavator mounted magnet for rehandling ferrous metals.

Notes: Powered off machine's hydraulics

Type : Kerb Lifter

Fits :1,3,5 & 7 Tonne Machines

Application : For handling kerbs etc

Options : Free/Powered rotating

Video Demonstration (requires Microsoft Windows Media Player): KerbLifter.wmv

Type : Brush Cutter

Fits : 3 / 5 / 7 /14 / 21 ton and Backhoe Loader Machines

Application : Cutting long grass, brush and scrub.

Type : Mini Mastertank

Application : For re-fuelling smaller machines

Capacity : 275 litres

Weight (full): 350 kg

Type : Mastertank

Application : For re-fuelling larger machines

Capacity : 850 litres

Weight (full): 1000 kg

Type : Towable Bunded Site Fuel Bowser

Application : For re-fuelling machines

Capacity : 2000 litres (includes built in dispensing pump)

Type : Plant Trailer

Capacity : Up-to 3 Ton mini excavators.

Note: Please specify type of hitch at time of order.

Type : Solid Cab Covers / Vandal Guards

Fits : 3 / 5 / 7 / 14 / 21 / 35 / 45 / SuperLong Reach Machines and Backhoe Loaders

Application : For window protection and to reduce potential damage to machines left on-site overnight.

Type : Chalwyn Valves

Fits : Most machines

Application : Engine overspeed device required for petrolchemical contracts or similar (extra notice will be required to allow fitting)

Type : Spark Arrestors

Fits : Most machines

Application : Required for petrol, chemical or when using plant in hazardous areas. Required for petrochemical contracts or similar (extra notice will be required to allow fitting)